PLA 3D Printer Filament 1.75mm,1kg (2.2LBS) (BrownDark)

Explore our high-quality PLA filaments in a variety of colors, perfect for all your 3D printing needs. Elevate your prints with our innovative PLA series. PLA (Polylactic Acid) An environmentally friendly 3D printing material. PLA is a non-toxic, biodegradable thermoplastic aliphatic polyester derived from renewable resources such as corn or starch. It has a lower extrusion temperature compared to ABS and typically does not require a heated bed. PLA is the default recommended material for many desktop 3D printers. Product Features: High-Quality PLA Filaments: Made of high-quality PLA, a commonly used thermoplastic material features lower melting temperature and ease of use, low warp and shrinkage, odorless during printing, and provides a glossy surface finish. Dimensional Accuracy & Consistency: Strict tolerances guarantee these PLA filaments of 1.75 mm diameter much smoother and more stable printing with the dimensional accuracy of +/- 0.02 mm; 1 kg spool (2.2lbs). Less-tangle and Easy to Use: Full mechanical winding and strict manual examination to ensure that the line is neatly arranged and less tangled, and to avoid possible snap and line breaking. A larger spool inner diameter design for easy feeding. Clog-Free & Bubble-Free: Designed and manufactured with clog-free, superb layer bonding and great fluidity for smooth and stable extrusion. Complete dried for 24 hours before packaging and vacuum sealed with desiccants in the bag to protect the filament from moisture, no clogging and bubbling problems. Technical Specifications: Density: 1.24 g/cm3 @23℃ Melt Flow Rate: 5.2 g/10min @190℃/2.16KG Tensile Strength: 68MPa Elongation at Break: 4 % Flexural Strength: 85MPa Flexural Modulus: 3200 MPa Notched Izod Impact Strength: 36 J/m @ 23℃ Melting Temperature: 169 ℃ DSC 10℃/min Heat Distortion Temperature: 54℃@0.45MPa Notice The data contained in this document is based on trials carried out by our Research Centers. Properties are dependent upon process conditions and machine used, so these figures are only given for information.   Compatibility: Suitable for use with MakerBot, UP, Leapfrog, Creator, Builder, Felix, Ulti maker, and other similar 3D printers

• High-Quality PLA Filaments
• A commonly used thermoplastic material features lower melting temperature
• Ease of use, low warp and shrinkage, odorless during printing
• Provides a glossy surface finish
• Dimensional Accuracy & Consistency
• Strict tolerances guarantee these PLA filaments of 1.75 mm diameter
• Less-tangle and Easy to Use
• Clog-Free & Bubble-Free
• Bed Temperature: No heating/50-60℃ and Printing Temperature: 195-210℃